Read some of the most common questions below, and please get in touch if you have any additional queries.
What is the SEER Rating?
The SEER (seasonal energy efficiency ratio) is how the efficiency of your heating and cooling equipment is measured. The SEER is the amount of cooling your system will deliver per dollar spent on electricity, as compared to other systems. For example, a 3-ton unit may have a SEER efficiency rating of 13, 14, or 15. The higher the SEER the more efficient the system will be. The SEER rating of any given unit can range anywhere from 13 to 21.
Why should I have regular (or preventative) maintenance? And how often should I have it performed?
Your heating and cooling systems work incredibly hard to perform their functions for your home every day. The constant stopping, starting and continual operation can wear down any machine if the proper care and maintenance is delayed. However, by performing regular maintenance, you can maximize the lifecycle of your heating or cooling unit and guard against many common equipment failures. Preventive maintenance inspections performed on a regular basis can uncover leaks, rust, rot, soot, frayed wires and corroded electrical contacts that the naked eye may not notice. You should have maintenance done on your system regularly to ensure maximum efficiency and allow prevent possible problems that may occur in the near future.
Why do furnaces have filters?
Furnace filters are an important part of your overall furnace system. When the blower draws air in, it passes through the filter, helping to keep dust and pollutants like pollen, pet dander, and tobacco smoke out of the air.
Dirty filters increase energy costs and can damage your equipment. Clean filters also ensure better air quality throughout your home.
How often do I need to replace the filters?
Most guidelines recommend replacing them every one to three months, depending on the type and efficiency of your furnace. Your particular furnace should have specific guidelines. If a filter has a plastic frame that means it’s reusable and only has to be cleaned periodically with a vacuum and water, drying completely before putting back in the furnace.